Atlas Copco BT90 Safety And Operating Instructions Manual

Atlas Copco BT90 Safety And Operating Instructions Manual

Vibrating screeds

Advertisement

Quick Links

Huskvarna, 2018-03-12
Safety and Operating Instructions
Dear customer,
thank you for choosing a Husqvarna quality product. We hope that you will genuinely enjoy it.
Please note that the enclosed manual contains Atlas Copco references.
The Husqvarna Group is vouching for the quality of this product.
If you have any questions, please do not hesitate to contact our local sales or service point.
Husqvarna AB
561 82 Huskvarna, Sweden

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BT90 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Atlas Copco BT90

  • Page 1 Dear customer, thank you for choosing a Husqvarna quality product. We hope that you will genuinely enjoy it. Please note that the enclosed manual contains Atlas Copco references. The Husqvarna Group is vouching for the quality of this product. If you have any questions, please do not hesitate to contact our local sales or service point.
  • Page 2 Safety and operating instructions Vibrating screeds © 2015 Construction Tools EOOD | No. 9800 1187 01d | 2015-08-26 Original instructions...
  • Page 4: Table Of Contents

    BT 90 Contents Contents Introduction............... . 5 About the Safety and operating instructions.
  • Page 5 Contents BT 90 Noise data..............20 Dimensions.
  • Page 6: Introduction

    Safety and operating instructions Introduction Thank you for choosing a product from Atlas Copco. Since 1873, we have been committed to finding new and better ways of fulfilling our customers' needs. Through the years, we have developed innovative and ergonomic product designs that have helped customers improve and rationalize their daily work.
  • Page 7: Safety Instructions

    Safety and operating instructions BT 90 Protective gloves ● Safety instructions ● Proper protective boots To reduce the risk of serious injury or death to Appropriate work overall or similar clothing (not ● yourself or others, read and understand the Safety loose-fitting) that covers your arms and legs.
  • Page 8 BT 90 Safety and operating instructions DANGER Fuel hazard WARNING Dust and fume hazard The fuel is flammable and fuel fumes can explode Dusts and/or fumes generated or dispersed when when ignited, causing serious injury or death. using the machine may cause serious and permanent respiratory disease, illness, or other bodily injury (for Protect your skin from contact with the fuel.
  • Page 9 Safety and operating instructions BT 90 Avoid eating, drinking, and using tobacco products ► WARNING Motion hazards in areas where there is dust or fumes. When using the machine to perform work-related activities, you may experience discomfort in the ► Wash your hands and face thoroughly as soon as hands, arms, shoulders, neck, or other parts of the possible upon leaving the exposure area, and...
  • Page 10 BT 90 Safety and operating instructions Immediately stop working if the machine suddenly ► DANGER Electrical hazard starts to vibrate strongly. Before resuming the The machine is not electrically insulated. If the work, find and remove the cause of the increased machine comes into contact with electricity, serious vibrations.
  • Page 11: Transport, Precautions

    Always use original parts and accessories ► Always use hearing protection. ► approved by Atlas Copco. ► Change damaged parts immediately. Transport, precautions Replace worn components in good time. ►...
  • Page 12: Storage, Precautions

    BT 90 Safety and operating instructions Storage, precautions ♦ Keep the machine in a safe place, out of the reach of children and locked up. © 2015 Construction Tools EOOD | No. 9800 1187 01d | 2015-08-26 Original instructions...
  • Page 13: Overview

    Slabs with slumps in the concrete can XXXX be finished flat, parabolic, rooftop or inverted with XXXX the unique adjusting system of the screed. XXXX BT90 is powered by either a electric, petrol or Made in XXXXXXX pneumatic drive unit. Electrical drive unit Main parts EOOD...
  • Page 14: Safety Label

    BT 90 Safety and operating instructions Safety label Electric and petrol Screed section 1. Place the screed sections on a flat surface. It makes the assembly easier. 2. Unscrew the nuts (D) from the screws (C). Instruction manual. The operator must read the ♦...
  • Page 15: End Section

    Safety and operating instructions BT 90 7. When the bolt (B) is tightened, secure the screed 4. Slide the beams together in order to get the bolt guides (H) using two 19 mm flat spanners on the (B) into the screed hold (F). Use a 10 mm nuts (D) and the screws (C).
  • Page 16: Options

    BT 90 Safety and operating instructions 1. Dismantle the two handles. Options 0.5 meter (1.6 ft.) extension The extension is used to extend the beam by 0.5 meter (1.6 ft.). It can be fitted on all versions of the screed. It can only be mounted on the section with a free end.
  • Page 17: Starting

    Safety and operating instructions BT 90 NOTICE When operating the machine, follow the When taking a break instructions in the manual; never sit or stand on the machine when it is working. ♦ Stop the machine during breaks. Starting ♦ During all breaks, put the machine away so that there is no risk for unintentional start.
  • Page 18: Pneumatic Drive Unit

    BT 90 Safety and operating instructions Pneumatic drive unit Ampere: Voltage: 230V 6.3A 400V 1. Clean the machine directly after use, keep the machine clean. Spray with form oil or concrete Storage release agent to prevent concrete accumulation. 2. If a vibrator stops vibrating, it may need to be ●...
  • Page 19: Troubleshooting

    Safety and operating instructions BT 90 Troubleshooting Problem Screed type Cause Solution The screed does not start Pneumatic screed No pressure. Check the pressure. No air. Check the air flow. Air lever in off position. Turn the lever on. Electric screed Start switch in off position.
  • Page 20: Technical Data

    BT 90 Safety and operating instructions Technical data Machine data Electric Petrol Pneumatic Engine Honda GX270 Voltage (V) Phases Frequency (Hz) Power, kW (hp) 3 (4.1) 3 (4.1) 5 (7.5) at 2900 r.p.m. Full load current (A) 6.15 Speed, r.p.m. 2865 2865 2900...
  • Page 21: Noise Data

    , dB Type Operator´s position 1* Operator´s position 2** BT90 electric BT90 petrol * Position 1 is an operators position close to the engine. ** Position 2 is the operators position far away from the engine. The tested assembly was a drive unit with a three meter screed and a free end.
  • Page 22: Dimensions

    BT 90 Safety and operating instructions Dimensions mm (in.) Electric drive unit 560 (22) 545 (21.5) Petrol drive unit 560 (22) 610 (24) Pneumatic drive unit © 2015 Construction Tools EOOD | No. 9800 1187 01d | 2015-08-26 Original instructions...
  • Page 23 Safety and operating instructions BT 90 355 (14) 610 (24) © 2015 Construction Tools EOOD | No. 9800 1187 01d | 2015-08-26 Original instructions...
  • Page 24 BT 90 Safety and operating instructions 0,5 meter (1.6 ft.) extension 497 (19.5) 420 (16.5) 0,75 meter (2.4 ft.) extension © 2015 Construction Tools EOOD | No. 9800 1187 01d | 2015-08-26 Original instructions...
  • Page 25 Safety and operating instructions BT 90 746 (29.3) 420 (16.5) 1 meter (3.2 ft.) extension © 2015 Construction Tools EOOD | No. 9800 1187 01d | 2015-08-26 Original instructions...
  • Page 26 BT 90 Safety and operating instructions 1000 (39.4) 420 (16.5) 2 meter (6.5 ft.) extension 2000 (78.7) 420 (16.5) 3 meter (9.8 ft.) extension © 2015 Construction Tools EOOD | No. 9800 1187 01d | 2015-08-26 Original instructions...
  • Page 27 Safety and operating instructions BT 90 3000 (118.1) 420 (16.5) © 2015 Construction Tools EOOD | No. 9800 1187 01d | 2015-08-26 Original instructions...
  • Page 28: Ec Declaration Of Conformity

    We, Construction Tools EOOD, hereby declare that the machines listed below conform to the provisions of EC Directive 2006/42/EC (Machinery Directive), 2006/95/EC (Low voltage), 2004/108/EC (EMC) and the harmonised standards mentioned below. Drive unit Input power Rotation Weight BT90 electric 3 kW 3000 min 78 kg BT90 petrol 5.5 kW 3000 min...
  • Page 33 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. www.atlascopco.com...

Table of Contents