Check The Position Of The Flap; Activating The Appliance; Setting A Programme; Starting A Programme Without The Delay Start - John Lewis JLWD 1612 User Manual

Check the position of the flap

1. Pull out the detergent dispenser until it stops.
2. Press the lever down to remove the dispenser.
3. To use powder detergent, turn the flap up.
4. To use liquid detergent, turn the flap down.
B
Washer Dryer User Manual
1
2
A
With the flap in the position
DOWN:
• Do not use gelatinous or
thick liquid detergents.
• Do not put more liquid
detergent than the limit
showed in the flap.
• Do not set the prewash
phase.
• Do not set the delay start
function.
5. Measure out the detergent and the fabric
conditioner.
6. Carefully close the detergent dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.

Activating the appliance

1. Open the water tap.
2. Connect the mains plug to the mains socket.
3. Press button On/Off to activate the appliance.
A short tune sounds.

Setting a programme

1. Turn the programme knob and set the
programme:
• The related programme indicator comes
on.
• The indicator of Start/Pause flashes.
• The display shows: the default
temperature, the spin speed, the indicators
of the programme phases and the
programme duration.
2. If necessary, change the temperature, the spin
speed, the cycle duration, or add available
options. When you activate an option, the
indicator of the set option comes on.
If you set something incorrect, the
display shows the message Err.
Starting a programme without
the delay start
Press button Start/Pause to start the programme.
25