CAIRE FreeStyle Comfort Technical Manual page 17

VERIFY AC POWER OPERATION
AC power is for use at home or wherever standard
AC outlet power is available. The FreeStyle
Comfort is fully functional on AC power. The
FreeStyle Comfort will also recharge the battery
pack if needed any time AC power is available
(except in an airplane). The battery pack will
recharge whether the FreeStyle Comfort is
powered on or off.
WARNING: DO NOT CONNECT EX-
TERNAL POWER WITHOUT A
BATTERY PACK INSTALLED IN THE
OXYGEN CONCENTRATOR.
To connect the FreeStyle Comfort to AC Power:
1. Connect the AC power brick to the power
connector inlet on the front, right bottom of
the FreeStyle Comfort. Be sure to push
inward, so the connection is secure.
2. Connect the AC power cord to the AC
power brick.
FreeStyle Comfort
3. Connect the opposite end of the AC power
cord to the wall or another appropriate
electrical outlet.
4. Connect the AC power brick to the power
connector inlet on the front, right bottom
of the FreeStyle Comfort. Be sure to push
inward so that the connection is secure.
5. Turn on the FreeStyle Comfort by pressing
the power button and increase (+) or
decrease (-) the pulse setting.
6. Verify unit operates properly in all
settings.
Note: If the battery pack needs to be recharged,
the battery icon on the display will have a single
orange bar.
VERIFY DC POWER
DC power is for use in the accessory outlets of
automobiles, boat, or other motor vehicles. The
FreeStyle Comfort is fully functional for use on
DC power. The FreeStyle Comfort will also
recharge the battery pack if needed any time DC
power is available. The battery pack will recharge
both if the unit is off, or on and in use.
WARNING: DO NOT CONNECT EX-
TERNAL POWER WITHOUT A BATTERY
PACK INSTALLED IN THE OXYGEN
CONCERTRATOR.
1. Turn on your motor vehicle.
Note: Never operate the unit without the
vehicle running.
17