Maintenance And Care; Maintenance Intervals; Cleaning The Machine - Pfaff 3538-30/02 Instruction Manual

Maintenance and Care

11 Maintenance and Care
11

Maintenance intervals

.01
11

Cleaning the machine

.02
The required cleaning cycle for the machine depends on the following factors:
 Single or multi-shift operation
 Dust formation caused by the workpieces
Optimal cleaning instructions can therefore only be determined on a case-by-case basis.
The following tasks are recommended during a single shift operation to avoid operational er-
rors:
 Open the hook area cover.
 Clean the hook area daily, more frequently during continuous operation.
 Close the gripper area cover!
38
Cleaning the hook area .............................daily, several times during continuous operation
Cleaning the complete machine ............................................................................... weekly
Machine oil level .................................................................................. daily, before start-up
Checking / setting the air pressure ...................................................................... as needed
Cleaning the maintenance unit air fi lter ............................................................... as needed
These maintenance intervals are based on an average running time of a single
shift production shop. Shorter maintenance intervals are recommended for in-
creased running times.
Disconnect the machine from the electricity mains for all cleaning work by shut-
ting off the main switch or removing the mains plug! Risk of injury due to acci-
dental machine start-up!
Only operate the machine when the hook room cover is closed!
Risk of injury due to moving parts!