Exiting The Program Mode - GE NX-591E Installation And Startup Manual

To Change Location Data:
[changed data]
NOTE: These steps are repeated until the last segment is reached.
To Exit a Location:
#
To Review The Data:
[location]
Shortcuts:

Exiting the Program Mode:

5.
EXIT
NX-591E
The "Ready" LED will flash to indicate a data change
in process and will continue until the data is saved.
The new data is saved.
The keypad will advance to the next segment and
display its data.
Exits from this location.
extinguish. The "Armed" LED will illuminate waiting
for a new programming location to be entered.
The Armed LED will flash. If the location number is
#
valid, the "Armed" LED will extinguish, the "Ready"
LED will illuminate, and the zone LEDs will show the
binary data for the first segment of this location.
(Do not enter data.)
The next segment is displayed. Each time
pressed, the data of the next segment will be
displayed for review.
Previous location.
Same location.
Next sequential location.
Exits this programming level.
The "Ready" LED will
r
is
9