Troubleshooting - Royal Sovereign Paramount 65X Owner's Manual

11. TROUBLESHOOTING

Sympton
Machine will not turn on:
There is power, but the
roller are not turning after
the "RUN" button is pressed:
The unit is not heating up:
Curled lamination:
Cause
a. Power plug is not plugged in.
b. Power switch is in "0" (O
position.
c. Tripped circuit breaker.
d. Blown main power fuse.
a. Emergency switch(es) is (are)
engaged.
b. Laser safety sight is tripped
c. Blown motor fuse.
a. Did not raise the temperature.
a. Upward curl.
b. Downward curl.
11
Paramount 65X
Possible Solution
a. Plug the power cord into
appropriate outlet.
b. Put the power switch to the "I"
(On) position.
c. Reset the circuit breaker.
d. Replace the fuse.
a. Disengage the emergency
switch(es).
b. Remove obstacles or reposition
media
b. Replace the motor fuse.
a. Raise the temperature.
a. Loosen the top r
b. Loosen the bottom roll lm
tension