Safety Precautions - Royal Sovereign Paramount 65X Owner's Manual

Graphic lamination products
Table of Contents

Advertisement

2. SAFETY PRECAUTIONS

Failure to comply with any of the following safety procedures could result in serious injury.
Please read the instructions carefully and keep for future reference.
1. Only a licensed electrician should install wiring and outlet for the laminator.
2. Ensure the unit is plugged into a properly grounded outlet with the correct voltage.
3. Make sure the pressure value is less than 0.6 MPa (87PSI) which can be adjusted it by the regulating
valve which is located in the body on the right hand side then connect the air pipe to the air intake.
4. Keep hands and clothing (i.e. Neckties) away from rollers. The rollers have pinch points that can trap
body parts or clothing and cause serious injury.
5. Keep ammable and wet objects away from the machine.
6. Place machine on a level surface,then set the moveable feet down to oor to keep the machine steady.
7. Avoid excessive sunlight, humidity and extreme temperatures.
8. Ensure the unit is turned o , cooled, and unplugged from the outlet prior to moving and/or repairing.
9. Keep out of reach of children.
10. Only Royal Sovereign authorized maintenance and service technicians should make repairs.
11. Do not attempt to laminate items that exceed total recommended material thickness for the unit
12. When cleaning the machine, don't use ammable sprays or materials.
13. Do not touch the rollers when they are hot or place foreign objects inside the machine.
14. Do not cover the surface of the machine until the machine has completely cooled.
15. In the event of an emergency, press emergency switch immediately.
16. Temperature of circumstance: 20°C ± 5°C; humidity of circumstance < 95% (20°C ± 5°C)
17.
Warning - Hazardous Moving Parts – Keep Fingers And Other Body Parts Away.
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents