Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004
41.2.2 Detailed display of numbers/names
When showing clip, if the number and name is too long to be displayed on screen, as
much as possible will be shown and it will be possible to scroll up and down to see
the rest.
In phonebook and redial list if number is too long, '..' will be added to the end to
indicate that the number is longer than the display. There is no way to see the whole
number unless it is copied to pre-dial editor.
41.2.3 GUI timeout control
All local procedures are terminated automatically after a period T3 has elapsed
following the last entry.
Advisory and confirmation messages are displayed for a period T4 and error
messages for a period T5. By pressing any key the message disappears.
41.2.4 Navigation
The lists, menus and editors are navigated by using navigation hard -keys (up and
down keys).
When in menu, right-key accepts the active menu-item and left-key steps one step
back.
41.2.5 Base Settings
The base station itself monitors the menu settings in the base. If more than one
handset tries to change a menu item at the same time, only the first handset is
authorized to continue with the procedure. In the remaining handsets the procedure
is rejected.
The base menu will only be ava ilable at the PP if it is registered to a Giant base.
41.3 Visual signaling
41.3.1 Prompts
Prompts consist of a cursor and an input request. In some cases (e.g. PIN/date/time
entry), they also remain visible in the display after the user has pressed a key. In
other cases (e.g. name and number entered in the directory) the input overwrites the
prompt.
41.3.2 Warnings / confirmation prompts concept
Warnings are centered in the display and allow the user to cancel the action
(pressing any key).
An example of a confirmation prompt could be when the entire directory is deleted.
Page 42of 49