Setting The Handset Volume; Setting The Hands Free Volume; Setting The Headset Volume; Muting - Giant 5860 Operator's Manual

5.8g digital cordless phone
Table of Contents

Advertisement

Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004
8.8.1

Setting the handset volume

While in call and the audio is routed to the earpiece, press 'up' or 'down'.
If press 'up', the volume level will be increased one step and a menu showing the
current level will be shown.
If press 'down', the volume level will be decreased one step and a menu showing the
current level will be shown.
In the menu there is a timeout of T3, the display will then return to show call info.
8.8.2

Setting the hands free volume

While in call and the audio is routed to the speakerphone, press 'up' or 'down'.
If press 'up', the volume level will be increased one step and a menu showing the
current level will be shown.
If press 'down', the volume level will be decreased one step and a menu showing the
current level will be shown.
In the menu there is a timeout of T3, the display will then return to show call info.

8.8.3 Setting the Headset volume

While in call and a headset is connected and speakerphone is off, press 'up' or
'down'.
If press 'up', the volume level will be increased one step and a menu showing the
current level will be shown.
If press 'down', the volume level will be decreased one step and a menu showing the
current level will be shown.
In the menu there is a timeout of T3, the display will then return to show call info.

8.9 Muting

During External/Internal Call Conversation, press C /
microphone input. The
Press C /
/

8.10 Out Of Range Warning

The "Out Of Range" warning is alerted through a distinctive sound in the Speaker in
idle and through a sound in earpiece when in an active call.
K e n n e t h
1
1 4 : 1 5

9 Caller ID operation

9.1 Incoming call indication

If the network provider supports clip information, the caller's number will be shown
during incoming call.
If the network does not send out the date-time information and the clock in the base
has not been updated, the date -time digits will show '--:-- --/--'.
icon is turned on.
again to unmute. The
2 2 / 0 4
/
to mute the
icon is turned off.
Page 24of 49

Advertisement

Table of Contents
loading

Table of Contents