Summary of Contents for Giant 5860
- Page 1 Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Operator Manual 5860 (5.8G Digital Cordless Phone) Page 1of 49...
- Page 2 Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Revision History Version Date Initialised by Changes 17Feb2004 Kw Sit due to Creation from Concept documents request from Dick Si Page 2of 49...
-
Page 3: Table Of Contents
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Table of Contents Introduction ..................7 Feature List..................7 Setup and Power Up ..............10 Normal Power Up ....................10 Handset Power On/Off..................10 Basic Function Access Elements ..........11 Handset.......................11... - Page 4 Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Transferring External Call................. 21 7.4.1 CLIP Transference................21 7.4.2 Call Time Display................... 22 Conference Call....................22 7.5.1 Conference Call Status.................22 7.5.2 Conference Call Termination ............... 22 Handset Speakerphone (Optional) ..............23 Headset.......................23...
- Page 5 Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Setting Date -Time ................36 Auto Talk..................37 Any Key Answer................37 Direct Call ..................37 Handset Name Setting ..............37 Call Display Setting ...............38 Language Setting ................38 Reset Handset................38 Change Handset Pin ..............
- Page 6 Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 40.5.2.2 User Input ..................44 40.5.2.3 Moving the cursor.................44 40.5.2.4 Reaching the end of an editable area ........44 40.5.3 Number and Name Editor..............45 40.5.3.1 Entering the editor................45 40.5.3.2...
-
Page 7: Introduction
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 1 Introduction 5860 is a 5.8G Digital Cordless phone system which allow multiple handsets and bases. 2 Feature List Features Ability Comments, short description Max # of handset... - Page 8 Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Mute Pre -fix dialing Yes (Optional) Number placed in eeprom to be dialled as extension at every call. Eeprom selectable. The NumberLength = 22 digits max. Base Ringer Requires a buzzer.
- Page 9 Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface.
-
Page 10: Setup And Power Up
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets and keys. -
Page 11: Basic Function Access Elements
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Basic Function Access Elements 5.3 Handset Msg / Inuse LED Menu & Headse Jack Page Charge LED Msg / In-use LED Figure 1 Page 11of 49... -
Page 12: Hard Key Functions
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 5.3.1 Hard key functions The following functions shall be available via the existing keys: Key Symbol Key Description On/Off hook Menu/Ok Menu / Ok Move Up (browsing/editing) / Access re-dial list / Insert pause. -
Page 13: Top Text Line
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 5.3.3 Top Text Line The top Line is used for the name of the handset and Menu wording. 5.3.4 Center Text Line The center line is used for Missed Call and critical battery status. -
Page 14: Pp Registered And Located To A Fp
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Note : For above two cases, the Arial Icon blink is T = T15. 6.3 PP registered and Located to a FP: The PP index and name (if it has one) will be shown. If the date and time are set in the base, it will also be shown. -
Page 15: Icon Blink Cadence Definitions
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 6.3.1.4 Icon Blink Cadence Definitions Icon Context Blink On Time Blink Off Time Battery Battery Low/Critical 0.5 Sec 0.5 Sec Arial Not Registered 0.5 Sec 0.5 Sec Searching 0.5 Sec... -
Page 16: Alarm
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 K e n n e t h C h A r g e B a t t e r y 1 4 : 1 5 2 2 / 0 4 6.3.3.4 Alarm... -
Page 17: Registration
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 7 Registration The handset will only be active at one base station at a time. It is possible for the user to choose which base the handset should lock to in the the registration menu. -
Page 18: Pre-Dialing
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 8.1.2 Pre-dialing A user may enter the number before seizing the line as shown; 2 9 5 1 1 3 6 7 0 1 3 5 3 4 7 9 3 4 7 The digits will be cleared after T3 of no key press. -
Page 19: Display During Call
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Press [ ] to dial the number for that entry or press [OK] to append the number to the pre-dial buffer. Alternatively, redialing may also be done after the external line is connected. After seizing the line, press [ ] and the last dialed number will be shown. -
Page 20: Temp Tone Dial
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 0 : 1 0 : 3 1 8.1.6 Temp tone dial A user may like to change to DTMF dialing during the call if the call has been setup for pulse dialing. -
Page 21: Transferring External Call
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 0 : 1 0 : 3 1 To release an internal connection, press [ ]. The connection is released on both PP's and they return to Idle display. The release may be initiated from both sides. -
Page 22: Call Time Display
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 When PP1 releases its connection to complete the CT, the CLIP, if present, is transferred to PP2. CLIP is displayed as for a normal external call with CLIP. -
Page 23: Handset Speakerphone (Optional)
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 If both involved PP's presses [ ] key, the first step is to terminate the conference and the second step is to release the external connection. 8.6 Handset Speakerphone (Optional) -
Page 24: Setting The Handset Volume
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 8.8.1 Setting the handset volume While in call and the audio is routed to the earpiece, press 'up' or 'down'. If press 'up', the volume level will be increased one step and a menu showing the current level will be shown. -
Page 25: Rules For Displaying Call Information
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 J o h n S m i t h 2 3 5 7 7 4 9 0 - - : - - - - / - - If the caller’s number matches with a phone book entry, the name stored in the... -
Page 26: Call Waiting / Call Waiting Deluxe
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 CLIP -> OFFHOOK-CLIP (T13) -> CLIP -> (FLASH-Key) No CLIP 9.3 Call Waiting / Call Waiting Deluxe Call Waiting When you receive a Call Waiting alert tone in the earpiece (or Handset Speakerphone), the ‘waiting’... -
Page 27: Stutter Dial Tone Check
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 9.4 Stutter Dial Tone Check The unit can also detect Dial tone and/or Stutter dial tone in order to determine the message waiting status (ie the message waiting LED indicator) 10 Other Features 10.1 Identification of a parallel line occupancy (for a not seized line) -
Page 28: Paging
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 10.6 Paging Pressing the "Paging key” at the base unit transmits a page call to all handsets. The page call is signalled at the handsets with the selected ringer melody used for internal connections. - Page 29 Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 New Entry Special Ring No Melody 1 Mel o dy 2 Melody 3 Melody 4 Melody 5 Melody 6 Melody 7 Melody 8 Melody 9 Call List...
- Page 30 Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Melody 7 Melody 8 Melody 9 Tones Key Tones Pattern 1 Pattern 2 Pattern 3 Confirmation Tones Warning Tones Call Waiting Tones Range Alarm Set Alarm Set Time...
-
Page 31: Phone Book Directory
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Ringer Melody Melody 1 Melody 2 Melody 3 Melody 4 Melody 5 Melody 6 Melody 7 Melody 8 Melody 9 Base Reset Reset To Default Additional Features... -
Page 32: Use Number
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 12.2 Use Number Press [ ] to dial the number for that entry or press [OK] to append the number to the pre-dial buffer. Recalling a number from the directory after line seizure is also possible by pressing [&/3]. -
Page 33: Enter Number
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 12.5.2 Enter Number If no number is in the pre-dial buffer the user have to enter both number and name. If a number in pre -dial, the user will only have to enter name. The number in pre-dial is automatically copied to directory. -
Page 34: Distinctive Ringing
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Once a digit is entered, the word ‘Enter Number’ is cleared. A l f A e d 9 3 4 5 1 4 : 1 5 2 2 / 0 4 Press [C] to clear the last digit. -
Page 35: Browse Clip List
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 13.1 Browse CLIP List Press UP and Down to browse the list 13.2 Use the Record Press Talk to dial out the number on the record 13.3 Copy to Phone Book Press MENU/OK to select “Copy to PhoneBook”. -
Page 36: Alarm Setting
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 18 Alarm Setting After selecting ‘Set Alarm’ in the menu, users will be required to set the alarm on/off by pressing [&/3] or [4/INT]. A l a r m... -
Page 37: Auto Talk
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 The other way is to select ‘Date-Time’ from the menu and then users can enter the date and time in the format of ‘DD/MM’ and ‘HH: MM’. -
Page 38: Call Display Setting
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 24 Call Display Setting This is a PP setting. Select “Display” and “Call display” setting in the menu. Select either “Time” or “Number”. If Time is selected, there is Call time display during the call and certain time after the call. -
Page 39: Change Flash Time
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 ? T o n e ? P u l s e ? 35 Change Flash Time This is as FP setting to change the Flash time. It is accessed by “Base Setting”... -
Page 40: General Operation Notes
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Phone Book 40 records Null 22 digits per record 16 characters per record Audio Setting – Ringer Volume Off + 1 to 6 Audio Setting – Ringer Melody – External 1 to 9 Audio Setting –... -
Page 41: Display
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Speaker volume S p e a k e r V o l u m e L o w H I g h Ringer volume handset (Level 0 to 6, 0 for off). -
Page 42: Detailed Display Of Numbers/Names
In the remaining handsets the procedure is rejected. The base menu will only be ava ilable at the PP if it is registered to a Giant base. 41.3 Visual signaling 41.3.1 Prompts Prompts consist of a cursor and an input request. -
Page 43: Acoustic Signaling
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 41.4 Acoustic signaling 41.4.1 Ringing tones Same ringing tones as 2G4 LowCost will be used in the base. Handset will use polyphonic ringer melodies. 41.4.2 Acoustic signaling of incoming calls Signalling of external incoming calls has first priority. -
Page 44: User Input
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 41.5.1.2 User Input The editor is organized with a wrap around and is always in overwrite mode. 41.5.1.3 Moving the cursor The hard key [&/3] enables navigation to the left side in the editor field The hard key [4/INT] enables navigation to the right side in the editor field 41.5.1.4... -
Page 45: Number And Name Editor
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 41.5.3 Number and Name Editor This editor is used for inputting numbers and text (e.g. for editing directory entries). 41.5.3.1 Entering the editor Upon entering the cursor is always positioned at the first position in the editor. -
Page 46: Text Input Mode Switching
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 When a period of T8 has elapsed without another key being pressed, the character currently being displayed is automatically accepted and the input position moves on to the next position. -
Page 47: Timers
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 the “new” initial character is not automatically converted to upper case letters (for example, “Peter” changes to “eter” and not “Eter”). If a character is inserted in front of the initial, automatically capitalized character of a line or word, the “new”... -
Page 48: Warning (Fcc Part 15)
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. - Page 49 Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004 Carefully pack your unit. Include all accessories provided with the product. We recommend using the original carton and packing materials. Include a copy of the sales receipt or other evidence of date of original purchase (if purchase was within the last 12 months).