Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004
24 Call Display Setting
This is a PP setting. Select "Display" and "Call display" setting in the menu.
Select either "Time" or "Number". If Time is selected, there is Call time display
during the call and certain time after the call. If Number is selected, there is no
call time display, just the number.
25 Language Setting
This is a PP setting. Select "Display" and "Language" in the menu. Then select
"appropriate" language. After selection, the menu wording will be changed to
corresponding language.
26 Reset Handset
All handset parameters are reset to default values. It can be accessed by
"Advanced Setting" and "Reset Handset". See table of default values.
27 Change Handset Pin
It can be accessed by "Advanced Setting" and "Change Pin".
28 Register Handset
It can be accessed by "Advanced Setting" And "Register Handset".
After selection, put the handset on the corresponding base station.
29 Select Base
One handset can register to maximum 4 base. We can set handset to use one
fixed base or select any one of the available bases automatically.
It is set by selecting "Advanced Setting" and "Select Base"
30 Deregister Handset
This can be accessed by selecting "Advanced Setting" and "Deregister Handset".
It allows de-register the handset to certain base.
31 Base Ringer Volume
The procedure of changing base ringer volume is the same as changing the
handset ringer volume
32 Base Ringer Melody
The procedure of changing base ringer melody is the same as changing the
handset ringer melody
33 Base Reset
This is a FP setting to reset base parameter. It is accessed by "Base Setting" and
"Base Reset". See the table of default values for detail.
34 Change Dial mode
After selecting 'Dial Mode' from the menu, users can choose Tone or pulse
dialing mode.
D I a l
M o d e
Page 38of 49