Table of Contents
Advertisement
Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004
When PP1 releases its connection to complete the CT, the CLIP, if present, is
transferred to PP2.
CLIP is displayed as for a normal external call with CLIP.
Unattended CT :
When PP2 takes the call the CLIP, if present, is transferred to PP2.
CLIP is displayed as for a normal external call with CLIP.
8.4.2 Call Time Display
The counter will start local in the HS at 0, show the call time of HS not from the line.
8.5 Conference Call
Start condition is that a PP is in an active external call.
The way to make a conference is similar to the description for "Attended Call
Transfer". The conference state is indicated by an audible signal in the earpiece on
both PPs and on the external PSTN connection.
8.5.1 Conference Call Status
The second internal party is unable to make an outgoing call (en-bloc dialling,
-
standard dialling).
No additional handset may be added to a conference call in progress between the
-
two internal parties and the external participant.
When initiated a call transfer, it is not possible to switch between the parties.
-
INT - INT - EXT conference --> only controlled by on / off hook keys.
Display during a conference call:
EXT
INT
0 : 0 2 : 5 0
8.5.2 Conference Call Termination
Conference Call is terminated when one of the PP's involved presses the [
The other parties involved stay connected and the status change to an external call.
The operation of CLIP transference is similar to the Attended Call Transfer described
in 8.4.1 CLIP Transference.
Conference termination is indicated by an audible sound.
] key.
Page 22of 49
Advertisement
Table of Contents
