Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004
The other way is to select 'Date-Time' from the menu and then users can enter the
date and time in the format of 'DD/MM' and 'HH: MM'.
If the date-time information has not been updated before, the following screen can be
seen.
D a t e
T i m e
If the date-time information has already been there, users can still change the date
and time information as follows;
D a t e
T i m e
Press [? ] to change the time in 24 hours format.
D a t e
T i m e
The clock starts running as soon as the time and/or the date has been set.
Remark: The base distributes the data to all registered and reachable handsets when
it receives it.
20 Auto Talk
This is a PP setting. When enabled the PP answers an incoming call by pressing
any key. When in an active call the key has normal operation.
21 Any Key Answer
This is a PP setting. When enabled the PP answers an incoming call by pressing
any key. When in an active call the key has normal operation.
22 Direct Call
This is a PP setting. Select "Direct Call" Setting in Menu. Then set On/Off. If Set
On, set the Direct call number. If Direct call number is set, press any key in
standby and then dial out the direct call number.
23 Handset Name Setting
This is a PP setting. Select "Display" and "Handset Name" Setting in the Menu.
Then set the Name character for the handset. If the name is programmed, the
standby will display the handset name in the middle text line.
[ - - / - - ]
[ - - : - - ]
[ 2 2 / 0 4 ]
1 4 : 1 5
2 4 / 0 5
[ 1 4 : 1 5 ]
Page 37of 49