Browse Clip List; Use The Record; Copy To Phone Book; Delete Entry - Giant 5860 Operator's Manual

Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004

13.1 Browse CLIP List

Press UP and Down to browse the list

13.2 Use the Record

Press Talk to dial out the number on the record

13.3 Copy to Phone Book

Press MENU/OK to select "Copy to PhoneBook". It goes to Phone Book edition
mode with the CLIP name/number as the entry of PhoneBook name/number.

13.4 Delete Entry

Press MENU/OK to Select "Delete Entry". It needs to double confirm before
deletion.

13.5 Delete List

It deletes all read/old CLIP records. Press MENU/OK to Select "Delete List". It
needs to double confirm before deletion.

14 Setting the ringer volume

The ringer volume is set in the menu. The external melody will be played when
entering the menu and each time the level is changed to give an audible
indication of the current level.
The ringer melody is set in the menu. The current selected melody will be played
when entering the menu and each time the level is changed.

14.1 Setting the handset ringer volume to zero

It is possible to set the ringer volume to zero. In this case no melody will be
played. The 'ringer off' icon will be set on when the setting is accepted.
Notice that User selectable Ringer Volume is for External and Internal Ringer
Only. Paging/Alarm Ringer is in fixed level.
15 Setting the melody – External/Internal/Paging/Alarm
There will be a ringer a specific melody for both internal and external calls.
The external melody is used if the number is not found in the phonebook and
requires a specific melody to be used.
The ringer melody is set in the menu. The current selected melody will be played
when entering the menu and each time the selection is changed.
The melody will be played in the menu with the current ringer volume. If the
ringer volume is set to zero, the melody will be played with volume 1 (lowest
volume).

16 Setting Key Tone

There is distinctive key tone pattern.
The tone pattern is set in the menu. The current selected pattern will be played
when entering the menu and each time the selection is changed.

17 Setting Alert Tone On/Off

The Alert tone includes Confirmation/Warning/Call Waiting/Out of Range Tones.
The alert tone can be set as On/Off in the menu.
Page 35of 49