Giant Telecom Limited – Operator Manual for 5860 – Version 0 2 29Jun2004
? T o n e
? P u l s e ?
35 Change Flash Time
This is as FP setting to change the Flash time. It is accessed by "Base Setting"
and "Additional Features " and "Flash Time"
36 Prefix dialing (Optional)
The FP may be setup to add a pre-fix number to every number dialed on the PSTN
Line.
The Prefix dialing feature is eeprom selectable.
The Prefix dial number may be setup through a base menu. When selecting the
menu the Base PIN must be supplied prior to getting access to altering the prefix
dialing number.
The Prefix dial number base menu is only available if the feature is enabled via the
eeprom.
37 Call barring
It shall be possible to enter a phone number that will not be possible to be called
afterwards.
38 Change Base PIN
It can be accessed by "Base Setting", and "Base Pin".
39 Walkie Talkie (Optional)
It will be possible to put handset in walkie/talkie-mode. This enables the user to make
a call between two handsets without being locked to a base.
39.1 Entering Walkie Talkie -mode
Walkie talkie-mode is entered through a menu in the handset.
After choosing "Walkie talkie" the user is prompted for groupID.
The handsets need to have same groupID to be able to connect to eachother.
39.2 Making a call
To make a call in walkie talkie-mode, the user hook off with [
Handsets need to have the same groupID to be able to call eachother.
When hooking off in this mode, all other handsets with same groupID within range
will ring.
39.3 Exit Walkie Talkie -mode
Walkie talkie-mode is terminated through the menu. The handset will return to idle.
40 Factory default Values
Functional Settings
Handset Paramters
?
] or [Int/OK].
Possible Range
Factory
Default
Page 39of 49