Rize Contemporary III Owner's Manual page 11

Remote Control Operation Guide
Massage
Start Massage (11)
Press the UP button to activate the massage feature on the head and foot sections of the bed. Intensity starts at level 3.
Press the UP or DOWN
NOTES:
• Decreasing the massage to the lowest intensity level stops any active massage.
• This feature has an Auto Shutoff Timer that automatically turns off the massage after 15 minutes of continuous use.
Wave Modes (12)
Press this button to activate and select from different massage feels. The LED lights indicate the mode you have selected. You
can also press this button to turn the head and foot massages on. Intensity for the wave modes start at level 4.
Stop Massage (5)
Press this button to disable any active massage.
Under Bed Light (13)
Press this button to turn the under bed lighting on, helping you safely navigate in and out of bed during the night. The under
bed light has seven (7) colors. Press this button multiple times to change colors. Press and hold to turn the under bed light off.
Understanding the remote control features
• The adjustable bed uses BLE (Bluetooth Low Energy) remote control system.
• The buttons are backlit when pressed to aid in the visibility of the remote control in low-light environments.
• It is not necessary to face the receiver when operating the remote control. Remote signal is best transmitted
within 9 feet (3 meters) of the bed.
NOTE:
The bed may show minor intermittent performance because of typical radio frequency interference.
This is normal in the operation of the bed, not a defect.
Customizing the preset buttons
You can store new head and foot positions by customizing the preset buttons: Incline, Lounge, and Zero Gravity.
These can be reprogrammed with your desired positions at any time. For safety reasons, the Anti-Snore and Flat
buttons cannot be customized.
1
Move the head and/or foot sections to your desired position.
2
Press and hold the
buttons at the same time for 2.5 seconds.
The new bed position is now stored in your selected preset
button overriding the factory default.
To restore the presets to their factory settings, see "Resetting
your system" on page 12.
button to gradually increase or decrease the intensity of the massage.
Program button and any of the preset
11