Rize I-PK170 Assembly Instructions

I-PK & I-CS Bed Frame Assembly Instructions
Use with models: I-PK170, I-PK165, I-PK465, I-PK470; I-CS374PR, I-CS374PG

Parts included:

All frames include:
(2) Side Rails with Cross Rails
(2) Extender Rails
(2) End Caps
(2) Screws (4 Screws for I-CS frames)
(2) Thumb Nuts (4 Thumb Nuts for I-CS frames)
(1) Center Rail (I-CS frames include a Double Center Rail)
1
Set side rails out with the headboard brackets
on the same end. Swing out cross rails from
the side rails to a 90° angle.
3
Find the keyholes on the cross rails needed for the appropriate size bed. See images below.
For Queen Size Beds
Insert rivets on extender rail into selected keyholes. Slide arms away from each other to lock the position. Then insert
plug lock into keyhole at the end of the overlap. Repeat on the other side of the bed.
Foot parts for I-PK170, I-PK470, and I-CS374PR:
(4) Plastic Sockets
(4) Rollers
(2) Glides
Foot parts for I-PK165, I-PK465, and I-CS374PG:
(6) Glides
2
Install the glides OR the sockets & rollers on
the legs.
For King Size Beds
Plug Lock
3
Plastic
Socket
Glide
Roller
For California King Size Beds