National Alloy Assembly Instruction

Note: This assembly instruction will cover all configurations of Alloy fixed
height double bases.
Assemble the two adjustable upper channels as shown in Figure A. Using
1
the supplied handle and lock plate roughly set the length of the adjustable
channel to the desired surface size and configuration ordered in Figure B.
Repeat Step 1 for the second adjustable upper channel supplied.
Figure A:
Figure B:
Surface Size Freestanding:
48 39 1/2"
54 45 1/2"
60 51 1/2"
66 57 1/2"
72 63 1/2"
Using the tabs as shown in Figure C, attach one side of the adjustable
2
upper channel to the first end leg.
Figure C:
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call National Customer Service
Start: Mid:
42" 44 1/2"
48" 50 1/2"
54" 56 1/2"
60" 62 1/2"
66" 68 1/2"
Assembly Instruction
Alloy
Fixed Height Double
Bases
Package Contents
Hardware
M6 x 12
Handle
Lock Plate
Mounting Bracket
Woodscrews
Tools Required
4mm Allen Wrench
Screw Driver
#2 Phillips Bit
End:
42"
48"
54"
60"
66"
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
Part # 2951091
Rev, A
Printed in U.S.A
© 2014 Kimball International, Inc.
.
800.482.1717
Qty
8
4
4
4
8