National Alloy Assembly Instruction

Note: This assembly instruction will cover all configurations of Alloy
fixed height double bases.
Assemble the two adjustable upper channels as shown in Figure A. Using
1
the supplied handle and lock plate roughly set the length of the adjustable
channel to the desired surface size and configuration ordered in Figure B.
Do not fully tighten the lock plate.
Figure A:
Figure B:
Surface Size
48
54
60
66
72
Using the tabs as shown in Figure C, attach one side of the adjustable
2
upper channel to the first end leg.
Figure C:
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call National Customer Service
Freestanding:
39 1/2"
45 1/2"
51 1/2"
57 1/2"
63 1/2"
Assembly Instruction
Alloy
Fixed Height Single
Bases
Package Contents
Hardware
M6 x 12
Handle
Lock Plate
Mounting Bracket
Woodscrews
Tools Required
4mm Allen Wrench
Screw Driver
#2 Phillips Bit
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
Part # 2951092
Rev, -
Printed in U.S.A
© 2014 Kimball International, Inc.
.
800.482.1717
Qty
4
2
2
2
4