National Fringe Assembly Instruction Manual

Turn unit onto its back. If armed unit, remove the arm to
1
be replaced.
•
Remove legs from arm by removing (2) 1/4"-20 x 1"
machine screws and (2) #10 x 3-1/2" wood screws. To
remove wood screws, glide must be removed from
bottom of leg. Set all pieces aside to be reused later.
•
Cut black bottom from underside of chair, remaining
1" inside of the staple line.
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call National Customer Service
Assembly Instruction
Fringe
Upholstered Divider
Assembly
Recommend Tools
• Phillips Head Screwdriver
• Scissors
• Awl
Package Contents
• Upholstered Panel
• Mounting Plate
• 5/16" Flat Washer
• 1/4"-20 x 2-1/2" MSCR 3
• 1/4"-20 x 1" MSCR
• Template
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
Part # 3325323
Rev, -
Printed in U.S.A
© 2013 Kimball International, Inc.
.
800.482.1717
Qty.
1
1
7
2
1