Adjusting The Position Of The Armrest In Depth; Adjustment Options For The Modulite Seat Unit; Adjusting The Height Of The Armrests - Invacare Fox User Manual

1. Loosen screw A.
2. Adjust armrest to required position.
3. Retighten screw.
4. Repeat this procedure for the second armrest.
5.5 Adjusting the position of the armrest in
depth
WARNING!
Serious risk of injury if an armrest falls out of its
bracket because it was pulled too far forward.
– The armrest may be pulled forward out of the
bracket as far as the point where the end of
the inserted tube is flush with the rear of the
bracket, but no further.
• 3 mm Allen key
1577074-F
1. Loosen screws A and move armrest in depth.
2. Tighten screws securely.
5.6 Adjustment options for the Modulite seat
unit

5.6.1 Adjusting the height of the armrests

Setup
31