Adjustment Options For Modulite Seat Unit; Adjusting Armrest Height; Adjusting Armrest Width - Invacare FDX User Manual

Invacare® FDX®
1. Loosen clamping lever A.
2. Adjust height of linkage switch.
3. Tighten clamping lever.

5.7 Adjustment Options for Modulite Seat Unit

5.7.1 Adjusting Armrest Height

1. Loosen wing screw A.
2. Adjust component to desired position.
3. Tighten wing screw.
40
Fig. 5-12

5.7.2 Adjusting Armrest Width

WARNING!
Serious injury hazard if one of the armrests
falls out of its bracket because they have
been adjusted to a width which exceeds the
permissible value
– The width adjustment is fitted with red
markings A and the word "STOP". The
armrests must never be pulled out further
than the point at which the word "STOP" is
completely legible.
– Always tighten the fixing screws properly once
adjustments have been completed.
Depending on the side, the screw is accessible from
the front or the rear.
Fig. 5-13
1541361-N