Training Of Staff; Storing The Operating Instructions; Contact Addresses - unGer Hydro Power RO System RO40C Operating Instructions Manual

Table of Contents

Advertisement

Storing the operating instructions

1.7.2
Training for staff
These operating instructions are aimed at staff with the following professional qualifications:
The staff will be able to carry out the tasks assigned to them and to recognize and avoid possible dangers
independently on the basis of their professional training, experience and knowledge, as well as the
knowledge of relevant provisions.
1.8
Storing the operating instructions
This instruction manual must be kept in the immediate vicinity of the HydroPower RO and must be
available to the entire staff at all times. The operator must inform the personnel about the location of
these operating instructions.
If the user manual has become illegible due to constant use, the operator must obtain replacement from
the manufacturer.
These operating instructions can also be downloaded as a PDF at www.ungerglobal.com/downloads.
1.9
Contact address
Unger Germany GmbH
Piepersberg 44
42653 Solingen
Germany
Telephone: (49) 0212 / 22 07–0
Fax: (49) 0212 / 22 07–2 22
service@ungerglobal.com
www.ungerglobal.com
Introduction
NOTE
When transferring or reselling the HydroPower RO to third parties, the
following documents must be passed on to the new owner:
this manual,
`
the documentation of the repair work,
`
proof of maintenance work.
`
www.ungerglobal.com
Quality Tools for Smart Cleaning
9

Advertisement

Table of Contents
loading

Table of Contents