Table of Contents
Advertisement
Quality Tools for Smart Cleaning
5.7
Switching off the HydroPower RO
When the HydroPower RO is switched off, a self-cleaning process starts. For 1 minute, 100% of the
incoming water flows with increased pressure through the RO membrane 1 and the RO membrane 2 and
is discharged through the concentrate hose at the rear.
24
Operation of the HydroPower RO
Switching off the HydroPower RO
To switch off the HydroPower RO after finishing the work,
proceed as follows:
1. Turn the on / off knob to the red position.
The automatic self-cleaning process starts, which
`
rinses the residues from the membrane. This operation
lasts approx. 1 minute, do not interrupt it.
2. Three displays appear in an automatic sequence.
3. Switch off the main switch and disconnect the
HydroPower RO from the water supply and the power
supply.
The HydroPower RO is switched off and can be
3
transported.
www.ungerglobal.com
Advertisement
Table of Contents
