Table of Contents
Advertisement
Quality Tools for Smart Cleaning
2
About HydroPower RO
2.1
Using the HydroPower RO
2.1.1
Intended use
The HydroPower RO is used for the filtration of drinking water by demineralisation for the purpose of
glass and surface cleaning.
The HydroPower RO is intended for commercial use only.
The HydroPower RO may only be connected to drinking water lines.
2.1.2
Foreseeable misuse
The use of the HydroPower RO in any way other than described in the chapter „2.1.1 Intended use" is
considered to be non-compliant and thus unlawful.
This applies in particular to the use of the HydroPower RO for bacteria removal.
2.2
Technical specifications
2.2.1
Operating conditions
Ambient temperature [°C]
Water temperature [°C]
2.2.2
Electrical specifications
Primary electrical connection [V / Hz] 230 / 50
2.2.3
Protection types of electrical components
Electric motor
10
About HydroPower RO
Using the HydroPower RO
ATTENTION
Material damage due to improper handling.
Ensure that the incoming water corresponds to the national drinking
water regulations.
The drinking water must be free of iron, manganese and heavy metals
(max. 0.2 ml / l iron, 0.05 mg / l manganese), the maximum silicate (SiO2)
content must not exceed 20 mg / l. It must also not contain barium and
strontium.
IP 54
www.ungerglobal.com
5 ... 40
5 ... 30
Advertisement
Table of Contents
