unGer Hydro Power RO System RO40C Operating Instructions Manual page 22

Quality Tools for Smart Cleaning
22
Operation of the HydroPower RO
The settings menu
Select the top menu item to set the LANGUAGE:
• Press the ENTER button to select.
• The current selection is highlighted in yellow.
Select the menu item UNITS to set the unit of measure for
water.
Select the menu item TIME / DATE to set the 12-hour or 24-
hour time display.
This is for diagnostic purposes and should not be changed
after correct initial adjustment. The values can be set with
the arrow keys.
Select the menu item INFORMATION to find useful
information about the performance of the HydroPower RO.
• VOLUME - water flow and water production,
• AVERAGES - average water values as well as average
pure water quality after filtering through the membrane,
• FILTER CHANGES - frequency of the previous filter
changes,
• CYCLE RUNTIME - information on the frequency of the
system starts, resin bypasses and pump running time.
Select the menu item FIRMWARE to find the current
version of the operating software. This can be updated via
USB stick. See chapter „5.8 Software update".
www.ungerglobal.com