Table of Contents
Advertisement
3.2
Mechanical hazards
Crushing due to incorrect operation and / or carelessness.
Do not reach between the ground surface and the HydroPower RO.
`
Do not place objects in the openings of the HydroPower RO.
`
Place the HydroPower RO on an even surface only.
`
Ensure sufficient stability and secure the HydroPower RO against tipping over or rolling
`
away.
In the case of faults and emergencies, immediately turn off the unit by pressing the STOP
`
button on the main switch of the HydroPower RO.
Wear safety shoes.
`
3.3
Electrical hazards
Electric shock and burns due to live parts.
Before each use, perform a visual inspection of the power cable for damage. If you notice
`
any damage, contact your distributor.
Maintenance on the electrical components of the system may only be carried out by
`
employees of Unger Germany GmbH or their authorized specialist dealers / technicians.
3.4
Thermal hazards
Burns due to hot surfaces.
The housing of the pump motor can become hot during operation. Allow the system to cool
`
down sufficiently before touching components marked with this symbol.
Wear protective gloves.
`
3.5
Hazards due to pressure
Injuries from pressurized containers.
The 4 filter vessels are pressurized during operation.
`
Never open a filter vessel during operation.
`
Bleed the air out of the HydroPower RO before opening and during initialization by pushing
`
the two yellow buttons on the lids of the front two vessels.
Safety
Mechanical hazards
www.ungerglobal.com
Quality Tools for Smart Cleaning
13
Advertisement
Table of Contents
