Operator Controls - Light Emitting Diodes (Led); Operator Controls - Toshiba 5000 SERIES Installation And Operation Manual

12.2 Operator Controls – Light Emitting Diodes (LED)
The following table describes the front panel LED behaviors and the associated meaning.
LED Behavior
On-Line/
Green – ON
Fault
Green – OFF
Red – ON
Red – OFF
Warning
Amber – Flashing
Amber – OFF
A/C Input Green – ON
Green – Flashing
Green – OFF
NOTE: On-Line/Fault LEDs – Appear Amber if Green and Red flash concurrently.
12.3

Operator Controls

No.
1 UPS MCCB (Main Power Switch)
Screen Reset Switch
2
UPS. The display can be reset by pressing the recessed Reset Switch with a thin
probe, such as a paper clip.
3 LED Test –Test button for Status Indicator LED Light Tree. Press and hold to verify LEDs
illuminate. Release to end test.
4 Bypass/On-Line Rotary Switch
1
5000 Series NEMA-3R 3-Phase UPS Installation and Operation Manual – 92975-000
TABLE 12.1: LED BEHAVIOR KEY
Significance/Meaning
UPS is in On-Line, Backup, or Battery Test mode.
UPS in Bypass or Shutdown mode.
One or more Ffaults occurred. See Records> Fault/Warning for details.
No fault occurred.
One or more Warnings occurred. See Records > Fault/Warning for
details.
No Warning occurred.
Input or Bypass voltage is within specified range.
Input or Bypass voltage is over specified range.
Input or Bypass voltage is under specified range.
TABLE 12.2: MANUAL OPERATOR SWITCHES
Operator Controls
Function
– LSwitches main power to the UPS "ON" and "OFF".
– Allows the display to be rebooted without powering down the
– Switches main power to the UPS "ON" and "OFF".
2
3
4
49