Toshiba 5000 SERIES Installation And Operation Manual page 73

Tab: SETUP (cont.)
Pressing an active button will cause a list of parameters to be displayed (See previous page). Pressing a
listed parameter will activate a display appropriate to the parameter selections available If the parameter
cannot be edited at the current security level, the display will not change. If the parameter can be edited
or changed, an appropriate keypad will displayed as shown below. Either a alpha/numeric keypad, a
multiple choice, or binary choice display will appear.
After entering data or selecting an options, press WRITE to save the selections, or QUIT to leave the cur-
rent value unchanged.
Example 1 – Alpha/numeric display.
Example 2 – Multiple Choice Display with
Default value Marked (*)
5000 Series NEMA-3R 3-Phase UPS Installation and Operation Manual – 92975-000
TABLE 12.4: TOUCHSCREEN KEYPAD IDENTIFICATION
Button
Clear Delete all characters on input line
Space (Space bar)
Recall Restores previous entered value
← → Move cursor one space left or right
DEL Delete character to right of cursor
← BS
Back Space – Delete character to
left of cursor
ABC Set Keypad to capital letters
(A,B, C...)
abc Set Keypad to lower case letters
(a, b, c...)
123 Set Keypad to numbers (1, 2, 3...)
./- Set Keypad to write Special
Characters ( . , – : / )
Write Write information (Enter)
(Pressing Quit without first press-
ing Write will cause the newly
entered data to be lost.)
Quit Exit keypad.
Example 3 – Binary choice (On/Off,
Enable/Disable, Contact A/Contact B)
Action
63