Setup; Unpacking; Inventory - Shop fox M1099 Owner's Manual

Model M1099 (Mfg Since 8/07)

Unpacking

This machine has been carefully packaged for safe
transportation. If you notice the machine has been
damaged during shipping, please contact your authorized
Shop Fox dealer immediately.

Inventory

After all the parts have been removed from your
shipment, you should have the following items:
Installed Accessories (Figure 1) .........................Qty.
A. Three-Jaw Chuck (5") .................................... 1
B. Steady Rest ................................................ 1
C. 4-Way Tool Post and Compound Rest .................. 1
D. Compound Slide ........................................... 1
Packaged Accessories (Figure 2)
E. Hex Wrench Set (2.5, 3, 4, 5, 6 mm) ............. 1 EA
F. Tool Box .................................................... 1
G. Faceplate (8") ............................................. 1
H. Four-Jaw Universal Chuck (6
I.
Low Range Belt ........................................... 1
High Range Belt (Installed) ............................. 1
J. Phillips and Standard #2 Screwdriver ............. 1 EA
K. Wrench Set (12/14, 12/14, 19/17 mm) ............1 EA
L. Three-Jaw Chuck Internal Jaw Set .................... 1
M. Three-Jaw Chuck Key .................................... 1
N. Four-Jaw Chuck Key ...................................... 1
O. Oil Bottle .................................................. 1
P. Cross Feed Handle ........................................ 1
Q. Carriage Feed Handle .................................... 1
R. Dead Center MT#3 ....................................... 1
S.
Change Gear Set .......................................... 1
— Change Gear (27-tooth, Installed) .........................1
— Change Gear (36-tooth) ........................................1
— Change Gear (40-tooth) ........................................1
— Change Gear (44-tooth) ........................................1
— Change Gear (46-tooth) ........................................1
— Change Gear (48-tooth, Installed) .........................1
— Change Gear (52-tooth) ........................................1
— Change Gear (45-tooth) ........................................1
— Change Gear (56-tooth, Installed) .........................1
— Change Gear (60-tooth) ........................................1
— Plastic Drive Gear (60-tooth, Installed) .................1
— Change Gear (104-tooth, Installed) .......................1
— Change Gear (120-tooth) ......................................1
— Change Gear (127-tooth, Installed) .......................1

SETUP

⁄ ") ...................... 1
1
2
-11-
Some hardware/fasteners on the inven-
tory list may arrive pre-installed on
the machine. Check these locations
before assuming that any items from
the inventory list are missing.
A
B
Figure 1. Installed accessories.
E
F
G
J
K L
R
P
Q
Figure 2. Packaged accessories.
C
D
H
I
M
N
O
S