Manual Feed Handwheels - Shop fox M1099 Owner's Manual

Model M1099 (Mfg Since 8/07)

Manual Feed Handwheels

You can manually move the cutting tool around the
workpiece using the three handwheels shown in Figure
27.
Compound Rest Handwheel
Compound Rest Handwheel
The compound rest handwheel controls the position of
Cross Slide
the cutting tool relative to the workpiece. The graduated
Handwheel
dial on the handwheel indicates the depth of compound
rest movement. The angle adjustment is held by two hex
Carriage
nuts on the base of the compound rest.
Handwheel
Cross Slide Handwheel
The cross slide handwheel moves the top slide toward and
Figure 27. Manual handwheel controls.
away from the workpiece. Turning the handwheel clock-
wise moves the slide toward the workpiece. The gradu-
ated dial on the handwheel indicates the depth of cross
slide movement.
Carriage Handwheel
The carriage handwheel moves the carriage left or right
along the bed. This control is helpful when setting up the
machine for turning or when manual movement is desired
during turning operations.
-26-