Shop fox M1099 Owner's Manual page 17

9. Turn the lathe OFF, disconnect power, move the
drive belt to the next highest RPM and then run the
lathe for 10 minutes.
10. Repeat Step 9 for the rest of the speeds, progres-
sively increasing the speed.
11. Change the lubricant in the headstock with Mobil
DTE Oil or an equivalent, and re-lubricate the
®
lathe. Refer to General Lubrication on Page 32 for
steps and locations.
-14-
Model M1099 (Mfg Since 8/07)