Setup; Unpacking; Inventory - Shop fox W1836 Owner's Manual

Unpacking

This machine has been carefully packaged for safe
transportation. If you notice the machine has been
damaged during shipping, please contact your authorized
Shop Fox dealer immediately.

Inventory

The following is a description of the main components
shipped with the Model W1836. Lay the components out
to inventory them.
Note: If you can't find an item on this list, check the
mounting location on the machine or examine the
packaging materials carefully. Occasionally we pre-install
certain components for safer shipping.
Box.Inventory.(Figure.6).
A. Live Center .................................................1
B. Knock-Out Bar ..............................................1
C. Spur Center .................................................1
D. Handwheel Handle ........................................1
E. Tool Rack ....................................................1
F. Cord Wrap Mounts .........................................2
Hardware.(Not.Shown).
— Shoulder Bolt M6-1 X 10, 7 X 44 .....................1
— Phillips Head Screws M5-.8 X 12 ......................6
— Flat Washers 5mm.......................................6
Model W1836 (For Machines Mfd. Since 04/15)

SETUP

Keep. machine. disconnected. from.
power.until.instructed.otherwise.
Qty
-12-
B
C
A
F
E
Figure.6. W1836 inventory.
D