Controls & Components - Grizzly G1066R Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
G1066R
Refer to Figures 45–47 and the following descrip-
tions to become familiar with the basic con-
trols and components of the Model G1066R.
Understanding these items and how they work will
help you understand the rest of the manual and
stay safe when operating this machine.
A
B
Figure 45. G1066R—ON/OFF controls.
A. ON Button: Push to start motor.
B. OFF Button: Push to stop motor.
Figure 46. G1066R—front controls.
-6-
manual BEFORE
C
D
C. Table Height Crank Handle: Rotate to
raise or lower conveyor table according to
workpiece thickness.
D. Conveyor Table w/Belt (Infeed End):
Height-adjustable table with conveyor belt
that feeds workpieces toward sanding drums.
E
F
G
Figure 47. G1066R—drum components.
E. Tension Wheel: Tensioned anchor point for
end of sandpaper roll.
F. Sanding Paper Clip: Secures end of sand-
paper roll to tension wheel.
G. Tension Spring: Supplies tension between
sanding drum and tension wheel.
H. Outfeed (Rear) Sanding Drum: Cylindrical
drum with machined surface that is covered
in felt. Typically wrapped with fine grit sand-
paper to perform finish sanding portion of
operation.
I. Infeed (Front) Sanding Drum: Cylindrical
drum with machined surface. Typically
wrapped with coarse grit sandpaper to per-
form thickness sanding portion of operation.
Model G1066R/Z/G1079R (Mfd. Since 02/11)
H I