14
To add a communication port, press "Add Root" button.
Figure 7 - Add Communications Port (Root)
Each Micro-6000 Datalogger will communicate via USB. Select connection type
"ComPort", "PakBusPort (Other Loggers)", "CR6Series and press "Close".
Figure 8 - Select Device to Add
Select "ComPort" under the "Network Map", select the communications port to connect
to the Datalogger in "ComPort Connection".
C
N
: I
"C
ENABLED"
ONDITIONAL
OTE
T MAY BE NECESSARY TO PRESS
OMMUNICATIONS
TO
C
P
.
OPEN THE
OMMUNICATIONS
ORT