Daisy-Chain Operation; Table 18 - Multiplexers - Geokon 8600-2 Instruction Manual

Release Time
Switching Life
Ambient Temperature
TRIPOLAR PLASMA SURGE ARRESTOR:
Nominal DC Breakdown Voltage
Surge Life
Maximum Surge Current
Insulation Resistance
Operating Temperature
BIPOLAR PLASMA SURGE ARRESTOR:
Nominal DC Breakdown Voltage
Maximum Surge Current
Insulation Resistance
Operating Temperature
INDUCTOR:
Rated Current
Inductance
D.C.R.
TRANSIENT VOLTAGE SUPPRESSOR (TRANSORB)
Rated Power
Peak forward Surge Current
Reverse Standoff Voltage
TRANSDUCER CONNECTION MAXIMUM OPERATING VOLTAGE LEVELS:
Common-mode Voltage/Earth Ground
Differential-mode Voltage (Channel # 'H' –
Channel # 'L')
RESET AND CLOCK MAXIMUM OPERATING VOLTAGE LEVELS:
Single-ended Control Voltage/System Ground 16V(max)
F.6 Daisy-Chain Operation
Up to eight 8032's can be "daisy-chained" together using a common RESET and CLOCK
control line. This may be advantageous in situations where either there are not enough control
ports available on the Micro-6000 Datalogger for the number of multiplexers desired, or to
reduce the number of cables required to implement a large multi-channel system.
SW1 located on the Terminal Block side of the circuit board determines the address of each
multiplexer and the corresponding signal channels. As many as 256 two-conductor channels or
128 four-conductor channels can be accessed per RESET line.
≈5 msec
Mechanical: 5 x 10
Electrical @ 30W: 2 x 10
−40 to +70°C
230V
100 (10/1000 ms pulse @ 200 A)
5 kA per side (8/20 µs pulse)
9
10
−65 to +125° C
150V
1 kA (8/20 µs pulse)
10
10
−65 to +125° C
4A
10µH (±20%)
25mΩ MAX (at 20°C)
1500W
200A
16.0V
16V(max)
16V(max)
Table 18 - Multiplexer Specifications
operations
7
Ω
Ω
33
operations
5