Figure 5 - Install Device Driver; Figure 6 - Launch Menu, Setup - Geokon 8600-2 Instruction Manual

13
In Device Type, Select "CR6" from the datalogger group. Within the CR6 pane use the
"install the USB driver" hyperlink to install the USB drivers. Follow the steps in the
Device Driver Installation Wizard.

Figure 5 - Install Device Driver

With the Launch Menu open, hover over "Main" and press "Setup" from the resulting list
of applications.

Figure 6 - Launch Menu, Setup

By default, the EZ View of the Setup Screen is displayed. To change the viewing method,
press the "Std View" icon at the top right of the Setup Screen. This Quick Start will show
the "Std View" of the Setup Screen.