Hex Dump Mode - SATO S8412 Operator's Manual

HEX DUMP MODE

The contents of the print buffer and the data received before it is placed into the print buffer may be examined
through the use of the Hex Dump Mode. Each line of the printed data is enumerated in the first column, the second
column contains the data in hexadecimal format, and the right column contains the same data in ASCII format.
The options of data to be printed are: receive data, receive buffer, and internal data. However, only one type of
data may be printed on a single label. Repeat the dump process to print the other data types as desired.
Use the keys on the printer's operator panel to select and enter the required options. Refer to the Menu Definition
Tables in the following chapter to provide an explanation of each menu screen.
Cancels
print job
CF Card
Mode
Service
Mode
S8400 Series Operator Manual
Unit 4: Printer Configuration
POWER
PASSWORD
ONLINE
QTY: 000000
LINE
OFFLINE
QTY: 000000
ENTER
LINE
5 sec.
CANCEL
ONLINE MODE
User
Mode
SEMBL MODE
ADVANCED MODE
Figure 4-18, Hex Dump Mode
Displayed
if password
feature is
0000
enabled
HEX DUMP MODE
Interface
Mode
SELECT DUMP DATA
RECEIVE DATA
RECEIVE BUFFER
INTERNAL DATA
Internal Data Receive Data
ENTER
4-20
Service
Mode
ENTER
Receive Buffer
ENTER ENTER
Hex
Dump is
printed
PN: 9001160B