SATO S8412 Operator's Manual page 77

MENU
SELECT LANGUAGE
ENGLISH
FRENCH
GERMAN
SPANISH
ITALIAN
PORTUGESE
MENU
MAINTENANCE MODE
SERVICE MODE
FACTORY MODE
COUNTER CLEAR
NONE
ALL
HEAD
CUT
DISPENSE
COUNTER
INDICATION
NONE
LIFE
HEAD
CUT
DISPENSE
LIFE COUNTER
X.X M
CUT COUNTER
X
HEAD COUNTER
[ 1 ] X.X M
[ 2 ] X.X M
[ 3 ] X.X M
DISPENSE COUNTER
X.X M
SERIAL NO.
S/N XXXXXXXX
S8400 Series Operator Manual
Unit 4: Printer Configuration
SERVICE MODE (TABLE 4-9)
Allows the language of the menu screens to be selected.
FACTORY MODE (TABLE 4-10)
Is the first menu screen of the Maintenance Mode that includes the Service Mode and Factory
Mode. Provides a prompt on the action required to proceed to the Factory Mode.
Counter Clear permits the operator to select individual counters to be reset to zero or by selecting
ALL, to entirely clear all of the printer's internal counters or EEPROM data.
Allows view of the recorded linear meters of printed media by the printer's internal counters.
Is an informational screen that provides the length of media used since printer setup.
Enables view of the printer's cutter counter identifying the quantity of cut cycles by that cutter.
Is an informational screen that provides the printed length of media using the existing print head.
The head counter should be reset each time the print head is replaced.
Enables view of the printer's dispense counter identifying the quantity of times the printer has
dispensed a label.
Enables the printer's serial number to be recorded within its memory.
DESCRIPTION
DESCRIPTION
4-36
PN: 9001160B