Specifications - SATO S8412 Operator's Manual

PIN SIGNAL
1 Strobe
2 Data 1
3 Data 2
4 Data 3
5 Data 4
6 Data 5
7 Data 6
8 Data 7
9 Data 8
10 ACK
11 Busy
12 Ptr Error
13 Select
14 AutoFD
1
15
16 Logic Gnd
17 FG
18 +5V (z=24k ohm)
1 Signals required for ieee 1284 mode.
UNIVERSAL SERIAL BUS (USB)
The Universal Serial Bus (USB) interface is a Plug-In Interface Module that can be installed by the user. It requires
a driver (shipped with each printer that has the interface installed) that must be loaded onto the PC and configured
to support USB peripherals using Windows 2000 or above. Details for loading the USB driver are contained in the
USB Interface Manual that is shipped with each printer with a USB Optional interface installed. Up to 127 devices
may be connected to a USB port using powered hubs.
ATTENTION: This Interface Type Is Not Compatible With Windows 98 Or Windows
Me.
Printer Connector
Cable
Host
Power Supply
Power Consumption
S8400 Series Operator Manual
Unit 3: Installation
PIN ASSIGNMENTS
DIRECTION
To Printer
To Printer
To Printer
To Printer
To Printer
To Printer
To Printer
To Printer
To Printer
To Host
To Host
To Host
To Host
To Host
Not Used
Frame Gnd
To Host

SPECIFICATIONS

USB Type B Plug
10 feet (3 m) maximum
Windows 2000 or above with USB Port
BUS Power through cable
+5 V at 80 ma
PIN SIGNAL
19 Strobe Return
20 Data 1 Return
21 Data 2 Return
22 Data 3 Return
23 Data 4 Return
24 Data 5 Return
25 Data 6 Return
26 Data 7 Return
27 Data 8 Return
28 ACK Return
29 Busy Return
30 PE Return
31 INIT
32 Fault
33
34
35
36 SelectIn
1
3-13
DIRECTION
Reference
Reference
Reference
Reference
Reference
Reference
Reference
Reference
Reference
Reference
Reference
Reference
From Host
To Host
Not Used
Not Used
Not Used
From Host
PN: 9001160B