TEST PRINT MODE
Figure 4-17 provides the specific sequence of events required by the operator. the printer, and the printer's
software for a test label to be printed. Test labels are designed to identify failures in configuration, adjustment
problems, and mechanical defects.
Use the keys on the printer's operator panel to select and enter the required options. Refer to the Menu Definition
Tables in the following chapter to provide an explanantion of each menu screen.
S8400 Series Operator Manual
Unit 4: Printer Configuration
TEST PRINT MODE
CONFIGURATION
BARCODE
HEAD CHECK
MEMORY
FONT
FACTORY
Scrolls
options
Configuration
Barcode
Head Check
ENTER
ENTER
ENTER
TEST PRINT SIZE
ENTER
TEST PRINT SIZE
LARGE
ENTER
Figure 4-17, Test Print Mode
FEED + POWER
Printer
beeps
Memory
Font
ENTER
ENTER
10 cm
TEST PRINT
PRESS ENTER KEY
ENTER
SMALL
Test Prints
Power off to
cease printing.
4-19
Factory
ENTER
PN: 9001160B