Gl-Connection Software; Necessary Requirements; Installing The Usb Driver; Installing The Gl-Connection - GRAPHTEC Data Platform GL7000 Quick Start Manual

6. GL-Connection software

The GL-Connection is a PC software for managing and measuring on the GL7000.
The GL-Connection (included as standard) will do the following:
・ Operate the GL7000 (settings reference, recording start, recording stop etc.)
・ Record real time data (Real time data recording is possible at 1 ms at the fastest). *
・ Plays back recorded data
Following information lists the basic parts of the GL-Connection. For details,
see the GL-Connection instructions on the CD-ROM.

6-1. Necessary requirements

To install the software, use a PC that satisfies the conditions mentioned below.
・ OS:
Windows 7 (32/64bit) (* Starter Edition is not supported)
Windows 8 / 8.1 (32/64bit)
Windows 10 (32/64bit)
・ CPU:
Intel Core 2 Duo or higher is recinnebded
・ Memory: 1GB or higher is recommended
・ HDD:
32GB of empty hard drive space is needed to install the software.
・ Display:
800x600 resolution or above, 65,535 colors or more (16-bit or above)
・ Other:
CD-ROM drive (when installing from CD), USB port and LAN port are required

6-2. Installing the USB driver

When connecting the instrument to a PC via USB, a USB
driver must be installed on the PC. By selecting the automatic
program "USB Driver Install" on the attached CD-ROM, the
USB driver installation will start. For details, see the "Read the
USB driver installation
instructions" in the instructions.

6-3. Installing the GL-Connection

This link guides how to install the GL-Connection application software.
By selecting the automatic program "GL-Connection Install" on
the attached CD-ROM, the GL-Connection will launch and the
installation will start. Follow the instructions and continue with
the installation.
10
Installing the USB driver
Read the instruction manual
for installing the driver
Installing GL-Connection