Table of Contents
Advertisement
Operation and Configuration
Printer modes (cont'd)
Online Command Compatibility Mode
The printer can be set for compatibility with SBPL
commands or with the older MB200 commands.
Setting Online Command compatibility
(cover must be left open)
Compatibility
MB200
online commands
SBPL
online commands
You can check the current setting with a test printout
as described in "Performing a Test Print" on page 2.
When setting the online command compatibility
options, the STATUS LED blinks green, and turns
into a steady green signal upon completion of setting.
Turn off the printer ONLY when the STATUS LED is a
steady green light.
3-16
DSW-1
DSW-2
DSW-3
ON
ON
ON
ON
ON
ON
DSW-4
Other keys
ON
hold down PRINT
button
ON
hold down FEED
button
Advertisement
Table of Contents
