Section 3: Configuration and Operation
3 . 1 3 . 2 I f Y o u C h o s e t o R e s e t P r i n t e r S e t t i n g s
In the previous menu, if you chose PRINTER SETTINGS, the
following screen appears.
4. Press the
NO. If you select NO, you will return to the main DEFAULT
MODE screen.
5. Press ENTER to proceed to reset printer settings.
3 . 1 3 . 2 I f Y o u C h o s e A l t P r o t o c o l C o d e
In the previous menu, if you chose the ALT. PROTOCOL option,
the following screen appears.
4. Press the
NO. If you select NO, you will return to the main DEFAULT
MODE screen.
5. Press ENTER to proceed to reset the Alt. Protocol code.
3 . 1 3 . 3 C o m p l e t i o n o f D e f a u l t S e t t i n g
After the settings chosen in the previous menus have been reset,
the following screen appears.
Turn the printer OFF to exit the Default Mode.
Page 3-38
arrow buttons to choose between YES and
arrow buttons to choose between YES and
GT Series Operator's Manual