Section 1: Introduction
1.1 GENERAL SPECIFICATIONS (CONT'D)
Specification/
Model Name
One-
Barcode
dimensional
code
Two-
dimensional
code
Magnification
Rotation
Barcode Ratio
User mode
Automatic diagnostics
Noise emis-
Radiant noise
sion
Static with-
stand pressure
AC line noise
Optional accessories
Memory cartridge
Note:
All the GT printers use the same command codes. The only differences are the allowable values repre-
senting print positions on the label. These values are specified in "dots" and will vary depending upon the
resolution of the printer and the amount of memory available for imaging the label.
Page 1-6
GT408
• UPC-A/E, EAN8/13, JAN8/13
• NW-7
• INTERLEAVED 2 of 5 (ITF)
• INDUSTRIAL 2 of 5
• MATRIX 2 of 5
• CODE39, CODE93, CODE128
• UCC/EAN128
• Customer barcode
• RSS-14
•
QR code model 2, Micro QR (Ver 8.1)
•
PDF417 (Ver. 2.4, including micro PDF)
•
Veri code (Ver. 1.0)
•
MAXI code (Ver. 3.0)
•
Data matrix ECC200 (Ver. 2.0)
•
Synthetic symbol (UPC-A/E, EAN8/13, JAN8/13, CODE39, CODE128 CC-A/B/C
supported with RSS-14)
Vertical 1 to 12 times
Horizontal 1 to 12 times (characters)
1 to 12 L (barcodes)
Characters: 0°, 90°, 180°, and 270°
Barcode: parallel 1, serial 1, parallel 2, serial 2
1:2, 1:3, 2:5, arbitrary
1. Volume set value indication
4. Print position correction
7. Kanji font setting
8. Proportional pitch setting
Head check/ Head open/ Paper end/ Ribbon end/ Winding full/ Kanji ROM
check/ Test print
VCCI Class B
IEC Level 3
1000 Vp-p or more (50 nS to 1 µS pulse)
•
Peel unit (with mounting winder)
•
Cutter unit
•
Non-separate unit
•
Simplified peel unit
•
Internal winding unit
•
External winding unit
•
RFID unit
•
Detection scanner unit
•
EXT connector (external signal)
•
Interface boards (serial RS-232C or Parallel IEEE1284)
•
USB Interface board
•
LAN (10BASE-T/100BASE-TX),
•
Wireless LAN (IEEE802.11b),
•
Mini LAN (10BASE-T/100BASE-TX)
24 MB
GT412
2. Print speed
3. Print density
5. Zero slash changeover
GT Series Operator's Manual
GT424
6. Kanji code changeover