SATO GT424 Operator's Manual page 11

1.1 GENERAL SPECIFICATIONS (CONT'D)
Specification/
Model Name
External interface
Buttons
Operation
Panel
Switch
LCD
LEDs
Adjustment
Potentiometer
Sensor
Memory cartridge
Print Format
Stored Standard
Font Types
Truetype Fonts
Kanji Fonts
(where applica-
ble)
GT Series Operator's Manual
GT408
Interface board
¤ Parallel (IEEE1284)
¤ RS-232C
• READY/BUSY
• XON/XOFF
• Status 2/3
• Driver specific protocol
• Status 5
¤ USB (Ver. 2.0)
¤ LAN (10BASE-T/ 100BASE-TX automatic changeover)
¤ Wireless LAN (IEEE802.11b)
¤ Mini LAN (10BASE-T/ 100BASE-TX automatic changeover)
External (EXT) signal interface (14-pin)
LINE, FEED
FUNCTION, 4 navigation buttons (up/down/left/right), ENTER, CANCEL
POWER ON/OFF
Green LCD (with backlight), Vertical 32 dots x horizontal 128 dots, displaying up to five
icons at the top of the screen
POWER, ONLINE, STATUS, LABEL, RIBBON status indicators
VOLUME: buzzer loudness adjustment
PITCH: print-head pitch adjustment
OFFSET: tear off, peel, and cutter stop position adjustment
DARKNESS: print density adjustment
Paper sensor: reflection type, penetration type
16 MB FLASH ROM, 4 MB non-volatile user memory
Transmitted from host (computer) or recalled from print formats stored by user
on memory card (optional)
X20 5 x 9 dots (alphanumeric, symbol, and kana)
X21 17 x 17 dots (alphanumeric, symbol, and kana)
X22 24 x 24 dots (alphanumeric, symbol, and kana)
X23 48 x 48 dots (alphanumeric, symbol, and kana)
X24 48 x 48 dots (alphanumeric, symbol, and kana)
Outline font (alphanumeric, symbol, and kana)
OCR-A GT408 15 x 22 dots (alphanumeric and symbol)
GT412 22 x 33 dots (alphanumeric and symbol)
GT424 44 x 66 dots (alphanumeric and symbol)
OCR-B GT408 20 x 24 dots (alphanumeric and symbol)
GT412 30 x 36 dots (alphanumeric and symbol)
GT424 60 x 72 dots (alphanumeric and symbol)
CG Times (alphanumeric and symbol)
CG Triumvirate (alphanumeric and symbol)
16 x 16 dots (JIS level-1 and -2 kanji sets. Selectable either Mincho or Gothic)
24 x 24 dots (JIS level-1 and -2 kanji sets. Selectable either Mincho or Gothic)
22 x 22 dots (JIS level-1 and -2 kanji sets. Selectable either Mincho or Gothic)
32 x 32 dots (JIS level-1 and -2 kanji sets. Selectable either Mincho or Gothic)
40 x 40 dots (JIS level-1 and -2 kanji sets. Selectable either Mincho or Gothic)
Kanji outline font
Section 1: Introduction
GT412 GT424
Page 1-5