SATO GT424 Operator's Manual page 10

Section 1: Introduction
1.1 GENERAL SPECIFICATIONS (CONT'D)
Specification/
Model Name
Print method
Head density
Print valid range (width)
Print speed (Max)
Paper Thickness
Standard
Label size
(mounting
Tear off
and
cardboard
size)
Peel
Cutter
Non-sepa-
rate
Number of Roll paper
loadable
sheets
Fanfold
paper
Carbon ribbon
Width
Length
Thickness of base material
Color
Winding direction
Label dispensing modes
Dimensions
Weight
Power supply
Operating Environment
Page 1-4
GT408
8 dots/ mm (203 dpi)
104 mm x pitch 2500 mm
Not printable for 3 mm from the backside.
12 inches/sec
(Approx 300 mm/sec)
Note:
Maximum speed may be further dependent on the type of print layout, paper,
or carbon ribbon in use.
0.060 mm to 0.268 mm supported.
Note:
Be sure to use only printer supplies manufactured or certified by SATO.
Width: 22 to 128 mm (25 to 131 mm)
Pitch: 5 to 397 mm (9 to 400 mm)
Width: 22 to 128 mm (25 to 131 mm)
Pitch: 17 to 397 mm (20 to 400 mm)
Width: 22 to 128 mm (25 to 131 mm)
Pitch: 17 to 397 mm (20 to 400 mm)
Width: 22 to 128 mm (25 to 131 mm)
Pitch: 17 to 397 mm (20 to 400 mm)
Width: 22 to 128 mm (25 to 131 mm)
Pitch: 17 to 397 mm (20 to 400 mm)
Maximum external diameter:
200 mm (Approximately 150 m/roll) 3-inch paper tube used
Back winding (only front winding for non-separate mode)
Maximum folded height: 200 mm
See the section in this manual on Setting Fanfold Paper
Be sure to use the specified carbon ribbon manufactured by SATO.
39.5, 45, 59, 76, 84, 92, 102, 111, and 128 mm
Use a carbon ribbon that is wider than the paper used.
300 m/roll
4.5 µm
Black (standard), also red, blue, purple, and green
Front winding and back winding
Continuous, tear off, peeler, dispenser and non-separate
W 271 mm x D 455 mm x H 305 mm x (Standard)
14 kg (for a standard configuration)
Input voltage: AC 100 V to 240 V ±10%
Power consumption: Maximum 200 VA 150 W, print rate 30% (89 VA 40 W on standby)
Operational ambient temperature: 0 to 40 ×C
Operational ambient humidity: 30 to 80% (without condensation)
Storing ambient temperature: -5 to 60 ×C
Storing ambient humidity: 30 to 90% (no condensation)
Paper, and carbon ribbon excluded.
GT412
Thermal transfer or thermal
12 dots/ mm (305 dpi)
104 mm x pitch 1500 mm
12 inches/sec
(Approx 300 mm/sec)
GT Series Operator's Manual
GT424
24 dots/ mm (609 dpi)
104 mm x pitch 400 mm
6 inches/sec
(Approx 150 mm/sec)
Note:
Supported sizes may be
regulated due to the quan-
tity of print jobs or size of
paper.
Other usage conditions
may restrict the range of
label sizes supported.