SATO GT424 Operator's Manual page 141

Error No. LCD Message
12
13
14
15
16
GT Series Operator's Manual
Memory Writing error
Cause(s): 1. The memory cartridge is not inserted
2. There is no space left for copying
3. The writing or reading operation has failed for some
reason
4. The memory has not been properly formatted
1. Make sure a memory cartridge has been installed
Remedy:
2. Check that there is enough space for the memory
operation
3. Replace the memory cartridge
4. Format or reformat the memory cartridge
Alarm sound: One long beep
External signal: Machine error
Memory Reading error
Cause: There is no available space in the cartridge
Remedy: Delete unnecessary data in the cartridge to free up mem-
ory space
Alarm sound: One long beep
External signal: Machine error
Download Data Error
Cause(s): 1. Received invalid download
2. There is no download area
Remedy: 1. Check the download data
2. Check the download data size
Alarm sound: One long beep
External signal: Machine error
Cutter error
Cause(s): 1. The cutter unit is jammed or clogged
Remedy: 2. The cutter blade has not returned to the specified
position 1. Clean the cutter unit and clear any paper
jams
2. Press the FEED button to reinstate the proper cutter
blade position. If the same error message persists,
Alarm sound:
contact a sales outlet, dealer, or service center
External signal:
Three short beeps
Machine error
Cutter Open error
Cause(s): 1. The upper bracket of the cutter unit is open
2. The sensor is malfunctioning
Remedy:
Close the upper bracket of the cutter unit. If the same
error message persists, contact a sales outlet, dealer, or
service center
Alarm sound:
Three short beeps
External signal:
Machine error
Section 6: Troubleshooting
Description
Page 6-7