ID-AL EventPlayer mkII EP220 User Manual page 6

ID-AL - EventPlayer mkII - Audio and DMX player - User manual
1 - Introduction
EventPlayer mkII is an audio and DMX player providing Show Control function. The files are stored on a
microSD Card or USB flash memory device. This standalone player can read files automatically according
to a broadcast schedule or upon triggering by external events.
The Show Control function consists of sending commands to the 8 output contacts, programmed values
to the DMX channels or/and instructions through the serial link in synchronisation with the audio.
EventPlayer is used in sound & light shows, event driven industry, monuments displays, audio automation
and integration projects for museums, exhibitions, retail, theme parks & tourist attractions...
2 - Features
Interactivity: EventPlayer is an interactive player.
Broadcast pattern defined by file names
l
Electrical contacts: 8 inputs combinable up to 255 inputs to trigger files through sensors, push-buttons,
l
relays ...
Commands through the RS-232 serial link. A simple protocol is used to send commands to the player.
l
Commands via a web page through the Ethernet link.
l
Time programming. Integrating an real time clock, the player broadcasts files according to a schedule
l
created using the «ID-AL Scheduler» software.
An built-in infrared sensor allows remote control (optional external infrared sensor - EP230)
l
Show Control : EventPlayer mkII reads audio files and events files in the same time (sync). The events
are command to the outputs:
DMX Data on the XLR output to peripheral (dimmer, LED device , moving heads....)
l
8 output contact to control relays, motors, lamps...
l
Autoplay: EventPlayer starts automatically on powering on. This feature is programmable and can be
disabled.
Playback: The audio files are stored on a SD card or an external USB device. The playback pattern is
defined by file & directory names.
Audio input: The player offers a line level auxiliary audio input. The input is switchable through triggering
and programming. The player acts like a message box inserted in an existing sound system. A Fade in/
out is programmable to ensure a smooth transition.
RS-232 serial link: EventPlayer mkII can receive/send data from/to an external device.
Ethernet link: The player can be controlled by Ethernet network. (html web server) and the media could
be updated using FTP transfer.
® Waves System
- 4 -
V 1.0 - 2018