Summary of Contents for ID-AL EventPlayer mkII EP220
Page 1
ID-AL - EventPlayer mkII - Audio and DMX player - User manual EventPlayer mkII Show controller Audio and DMX player EP220 et EP230 MANUAL ® Waves System V 1.0 - 2018...
ID-AL - EventPlayer mkII - Audio and DMX player - User manual ACAUTION! DO NOT EXPOSE TO HUMIDITY & DUST! Unplug the power supply cable before any servicing FOR YOUR SAFETY, PLEASE READ THE USER’S GUIDE CAREFULLY BEFORE OPERATING YOUR PLAYER.
Page 4
ID-AL - EventPlayer mkII - Audio and DMX player - User manual • When using the device, comply with all local rules and regulations in force. Any modification or conversion of the device automatically entails loss of the homologation. The operation of a modified device is liable to a penalty.
ID-AL - EventPlayer mkII - Audio and DMX player - User manual A.6 - Terms of use: • This product has been designed for indoors use only. • If this device has been exposed to very high temperature fluctuations (e.g.: after transportation), do not connect it immediately.
Page 6
ID-AL - EventPlayer mkII - Audio and DMX player - User manual 1 - Introduction EventPlayer mkII is an audio and DMX player providing Show Control function. The files are stored on a microSD Card or USB flash memory device. This standalone player can read files automatically according to a broadcast schedule or upon triggering by external events.
ID-AL - EventPlayer mkII - Audio and DMX player - User manual 3 - Installation 1 - microSD 2 - DMX output 3 - LCD display 4 - Volume and menu 5 - Activity LED 6 - Infrared sensor EP230 Only...
Page 8
ID-AL - EventPlayer mkII - Audio and DMX player - User manual 2 - Connect speakers or a sound system to the audio output, the PSU and switch on the player 12v power supply Amplifier Speakers Power Supply Unit: We recommend you to use the PSU provided with the player. If you use another PSU, you have to respect the 12V specified voltage although the player can be power supplied between 10V and 15V.
Page 9
ID-AL - EventPlayer mkII - Audio and DMX player - User manual 3.1 - Connections Connection is directly from the sensor/push button to the player trigger input. Internal input schematic Optocoupleur In - Trigger input +V - power supply output for an external...
Page 10
ID-AL - EventPlayer mkII - Audio and DMX player - User manual 3.2 - Connexions - 8 input - EP230 only Up to 8 inputs, the connections are direct. Over 8 inputs, you need to make a combination using diodes or other electronic system according to binary combination.
Page 11
ID-AL - EventPlayer mkII - Audio and DMX player - User manual 3.3 - Contact output - EP230 Only The EP230 player can control an output contact to switch on/off some peripherals like LEDs, small motors, relays... The output is setup (on/off) by the name of the folder.
Page 12
ID-AL - EventPlayer mkII - Audio and DMX player - User manual 4 - Operating mode Compatibles files: .MP3: audio files MP3 format ( see appendix B) .WAV: audio filesWav format ( see appendix B) The file and folders names define the playback mode. The files and folders must be stored and copied according to a specific organisation described below.
Page 13
ID-AL - EventPlayer mkII - Audio and DMX player - User manual Special case: Folder 000 is the folder which will be played by default when powering on. When powering on, presence of this folder is checked ; if it is present, the player plays files of this folder.
Page 14
ID-AL - EventPlayer mkII - Audio and DMX player - User manual Example: 001 [J100] After the folder 001 playback, jump to the folder 100. 002 [J100] After the folder 002 playback, jump to the folder 100. 100 [RET] After the folder 100 playback, return to the previous folder (001 or 002).
Page 15
ID-AL - EventPlayer mkII - Audio and DMX player - User manual [NT] - This option defines the interruption mode of the folder currently read. If this option is registered in the folder name, the read file cannot be interrupted and instructions received are ignored.
Page 16
ID-AL - EventPlayer mkII - Audio and DMX player - User manual // example file #001: 05 A1 FF E4 // comment in the line #005: 45 85 63 21 78 A5 B2 #100: 98 75 35 45 98 // my command...
Page 17
ID-AL - EventPlayer mkII - Audio and DMX player - User manual [NXTxxx] - Play a defined number of audio files from the folder. This setting allows you to play a certain number of audio files from the folder designated by this tag. When the number of audio files played in the folder is reach, the player applies the output tags added to the folder name.
Page 18
ID-AL - EventPlayer mkII - Audio and DMX player - User manual EP230 only [Rxxx] - Active or deactive the outputs contacts when play folder Each file can operate the different outputs directly without any additional programming. You can light lamps, operate motors or any other actions depending on the file play.
Page 19
ID-AL - EventPlayer mkII - Audio and DMX player - User manual 4.2 Organisation of files inside folders. Like for folders, files name define the playback conduct. Note: The naming of the files is free if the reading is in a random mode.
Page 20
ID-AL - EventPlayer mkII - Audio and DMX player - User manual [Jxxx] designates the folder number to use after reading the current file. By adding this parameter within the file name, you define the conduct of the player at the end of the reading of the current file in order to read another file.
Page 21
ID-AL - EventPlayer mkII - Audio and DMX player - User manual This file is a text file (raw text without page setting ) that can be created with any easy text editor like «notepad» from windows or similar. On saving, use «ANSI» coding . Do not use special characters.
Page 22
ID-AL - EventPlayer mkII - Audio and DMX player - User manual 001[V-03].wav: decrease the volume level form 3 steps during the file playback. At the end of the reading of the file, the volume level goes back to its previous level.
ID-AL - EventPlayer mkII - Audio and DMX player - User manual 5 - Menu & configuration Several settings are accessible through the Data button to configure the EventPlayer. The DATA button has 2 functions: 1 - Endless rotation in both directions 2 - Validation push button When the player is in normal mode (i.e.
Page 24
ID-AL - EventPlayer mkII - Audio and DMX player - User manual First level menu choices: SOURCE Selects either the player or the auxiliary in source Displays the selected source (Main or Aux) main Equalizer MAIN Controls the tone (in «AUX» mode, controls the tone of the AUX input)
The EventPlayer is not just an audio player, it can also read sequence files in order to operate DMX512 devices. Using the Show Control Sequencer (free download from www.id-al.com) you will be able to create complete scenarii managing both broadcast of sound and sending commands to devices connected on the DMX port, in perfect synchronisation.
Page 26
ID-AL - EventPlayer mkII - Audio and DMX player - User manual Creation phases in the software: 1 - Create a new project 2 - Open the audio file of the project to arrange it on the timeline. 3 - Display the DMX device patch and set the DMX channels used in the grid 4 - Place the different events in the tracks 5 - Save the file and transfer it to the media of the player (USB key, microSD).
Page 27
ID-AL - EventPlayer mkII - Audio and DMX player - User manual 7 - Control with a Timestamped Programming (Scheduler) 7.1 Introduction The EventPlayer mkII can be controlled thanks to a timestamped programming. This feature, named Scheduler, allows to timetable the playback of audio files (messages, spots, musics, sounds) and to stop or resume the playback on accurate date and time.
Page 28
ID-AL - EventPlayer mkII - Audio and DMX player - User manual Notes : - The dates requiring no actions are left empty and do not refer to any day template. - If several dates require the exact same set of actions, then the calendar can refer to the same day template for these dates.
The timestamped programming is stored in a Scheduler file. This file is generated by the Scheduler software developed for this purpose. Please check our website for additional information (www.id-al.com). The files generated by the Scheduler software are TM2 files with the .tm2 extension.
Page 30
ID-AL - EventPlayer mkII - Audio and DMX player - User manual 9 - RS-232 serial link protocol The EventPlayer mkII can communicate with other devices by receiving instructions onto the Rx input or transferring data through its Tx output. The player complies with the RS-232 norm (see appendix for features).
Page 31
ID-AL - EventPlayer mkII - Audio and DMX player - User manual List of commands: 00h: not used X1h ( 01h to 71h): «Go to folder» command 02h: Player’s transport command 03h: Volume command 00h - 00000000b: not used 01h to 71h - 0xxx0001b : command of a jump into a folder The folder is designated by the bank number and the following data byte.
Page 32
ID-AL - EventPlayer mkII - Audio and DMX player - User manual Example of the full frame: 81 02 01 Octet 1 : 81h - 10000001b : status byte, player 001 Octet 2 : 02h - 00000001b : player’s transport command...
Page 33
ID-AL - EventPlayer mkII - Audio and DMX player - User manual Mode 2: «Monitoring» mode In this mode, the player send informations onto the Tx output depending on the actions executed. This mode do not allow to chain up the players. The player allows to a PLC, a computer, a security system, to know the status of the player and to make operating tests.
ID-AL - EventPlayer mkII - Audio and DMX player - User manual 10 - Ethernet link Via the Ethernet link, the EventPlayer communicates to update content via FTP (SD card, stick or USB HDD) and to receive commands in html Web server and check status of the player or outputs.
Page 35
ID-AL - EventPlayer mkII - Audio and DMX player - User manual The page is composed of 4 parts: A - Status of the player This block displays the status of the player as well as the directory name and name of the file being read.
Page 36
ID-AL - EventPlayer mkII - Audio and DMX player - User manual 10.2 - Use in FTP client Via the Ethernet link, the VP3x0 communicates either to update content via FTP (microSD card, USB flash memory). You can use the player in a local network. An adequately configured Modem/Router will allow update the player via the Internet.
The firmware upgrade is done from a microSD memory card (SD or SDHC). The upgrade is not supported from a USB flash memory. • On the www.id-al.com web site, download the firmware from the support page of the EventPlayer mkII. • Format your SD card in FAT32.
Page 38
ID-AL - EventPlayer mkII - Audio and DMX player - User manual Annexe A - Characteristics Interfacing and Connectivity • LCD display – 2 × 16 characters • Clickable knob (volume and setting menu) • Infrared sensor - Protocol: Sony SIRC, 12 bits, 38 kHz carrier •...
ID-AL - EventPlayer mkII - Audio and DMX player - User manual Audio Amplifier Speaker output: • 2 × 8 W - 8 , THD+N = 1 %, 1 kHz Ω • 2 × 10 W - 8 Ω , THD+N = 10 %, 1 kHz •...
Page 40
ID-AL - EventPlayer mkII - Audio and DMX player - User manual Design and manufacturing of interactive audio and video players Check our products, informations and technical solutions on our web site: www.id-al.com ® Waves System V 1.0 - 2018...